1.
Make sure that Memory Trans. indicator lights.
Normally Memory Transmission mode is selected.
If it is not, Immediate Transmission mode is selected. Press the [Memory Trans.] key.
2.
Place the original into the ADF.
3.
Make the scan settings you require.
For details about the scan settings, see "Scan Settings".
4.
Using the number keys or a Quick Dial key, specify a destination.
If you make a mistake, press the [Clear/Stop] key, and then enter the correct number.
5.
When sending the same original to several destinations (broadcasting), press [Add Dest]
to specify the destinations.
You do not have to press [Add Dest] when adding a destination using the destination list.
6.
Specify the next destination.
7.
Press the [Start] key.
BKQ027S
Transmission Modes
1
19