Horn Antenna or Wave Guide – ANSI Hole Pattern, 150#
process temperature (°C)
3"
6"
Horn Antenna or Wave Guide DN Hole Pattern, PN16
18.0
16.0
14.0
12.0
10.0
DETAILS TO BE UPDATED
8.0
6.0
4.0
2.0
-50
0
process temperature (°C)
80 mm
150 mm
WARNING: Never attempt to loosen, remove or disassemble process
connection or instrument housing while vessel contents are under
pressure.
1.
Customer to provide adequate bolting and flat-faced gasket to retain vessel pressure and pro-
vide sufficient sealing.
2.
Customer to provide adequate bolting and flat-faced gasket to retain vessel pressure and pro-
vide sufficient sealing.
7ML19985JE01
4"
8"
50
100
150
100 mm
200 mm
SITRANS LR250 (HART) – INSTRUCTION MANUAL
Process Connection Series:
•
51242 to 51???, and 512xx to
512xx, with 25546 and 255xx
series flange.
•
Ensure your instrument has
the process identification tag
showing one of this series, and
25546 or 255xx stamped on
flange.
•
Reference drawing number is
shown on the process device
tag. You can find this drawing
on our website:
www.siemens.com/
processautomation on the
LR 250 product page, under
Process Connection
Specifications.
Process Connection Series:
• 51242 to ????, and 512xx to
51512xx with 25547 and 255xx
series flange.
• Ensure your instrument has
the process identification tag
showing one of this series,
and 25547 or 255xx stamped
on flange.
• Reference drawing number is
shown on the process device
tag. You can find this drawing
on our website:
200
www.siemens.com/
processautomation on the
LR 250 product page, under
Process Connection
Specifications.
1
2
Page 113