Web Login/Logout And Password Change - Siemens SICAM Q100 7KG95 Series Manual

•
Switch the alternating voltages and alternating currents to be measured at the measurement object on
the measuring lines.
•
Enter the IP address (default: 192.168.0.55) in the web browser.
•
Enter User name and Password for the Web Login.
•
Carry out the measurements.
NOTE
i
i
If you change the measurement setup, de-energize the power lines and all measuring lines before opening
the control cabinet.

Web Login/Logout and Password Change

4.11.2
Web Login
You can log on to the user interface with the User name and Password. After successful login, you can
change the Password (see
To log on via the user interface, proceed as follows:
•
In the Log on tab, enter the User name and Password.
[sc_Web_log-on, 2, en_US]
•
Click Log on.
The Information tab appears if the entered user name and password are correct.
NOTE
i i
Without user interactions the Web UI will be accessible for 10 minutes (default). You can configure this
timeout.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A8, Edition 09.2020
3.4.2 Configuration via the User
Commissioning and First Steps
Interface).
4.11 Commissioning
289