Individual Settings; Deletion Of The Total Kilometers - Kettler SF1B Training And Operating Instructions

Training and Operating Instructions
26
GB
=>
=>
=>
=>
=>

Individual settings

Proceed according to the scheme: press "Reset"
Display:
all segments
now press "SET" longer: menu: Individual Settings
Display:
Total kilometers e.g. "odo 1120"
1. Deletion of total kilometers
Function: Deletion of total kilometers
Jointly press "Plus" + "Minus"
Display:
"odo 0."
Press "Set": switchover to next setting
Display: data OFF or On
Or
Skip deletion of total values by pressing "SET" only
Display: data OFF or On
2. Storage of defaults
Press "Plus" or "Minus"
Defaults for time, energy, distance, age, target
pulse and initial power are stored permanently
Function:
ON = Storage also after "Reset"
Off = Storage until next "Reset"
Press "Set":
Switchover to next setting
Display:
SPEED and DISTANCE
3. Display of kilometers or miles
Press "Plus" or "Minus"
Function: selection of kilometer or miles display
Press "Set": selected unit (flashing) is accepted
and switchover to the next setting
Display: ENERGY
4. Display of energy consumption in kjoule or kcal
Press "Plus" or "Minus"
Function: Selection of the energy consumption dis-
play
Press "Set": selected unit (flashing) is accepted
and switchover to the next setting
Display: MAXPULSE OFF or ON
5. Alarm sound for exceeding maximum
Press "Plus" or "Minus"
Function: Switch alarm sound on or off.
Press "Set": selected setting is accepted and
"Restart" of the display
Display:
restart of the display