Editing The Sender Name (Originator); Registering The Originator Name; Changing The Standard Originator Name - Oki MB472dn User Manual

Editing the Sender Name (Originator)

Registering the Originator Name

Changing the Standard Originator Name

You can change the sender name (originator) that is printed on a sent fax. To change the name, you must register the originator name
in advance.
Before using the following function, check that the [TTI] setting is enabled.
Disclosing a Sender Name (Originator) to the Recipient
Note
Only use alphanumeric characters for [Sender ID].
Memo
If you set [Sender ID], the name is automatically registered to [TTI 1].
Registering the Fax Numbers and Sender Name
Registering the Originator Name
You can register up to three sender names (originators).
1.
Press (SETTING).
2.
Press to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Select [Enter], and then press
5.
Press to select [User Install], and then press
6.
Press to select [TTI Register/Edit], and then press
7.
Press to select an originator number, and then press
8.
Enter a name.
You can enter up to 22 characters.
9.
Select [Enter], and then press
10.
Press until the top screen is displayed.
Changing the Standard Originator Name
If you have the sender (originator) name that is frequently used, it is recommended to specify the name as the standard originator
name.
1.
Press (SETTING).
2.
Press to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Select [Enter], and then press
5.
Press to select [User Install], and then press
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
304
(OK).
(OK).