Printing On Labels; Loading Labels - Oki MB472dn User Manual

Printing on Labels

Loading Labels

For Windows PCL Printer Driver
For Windows XPS Printer Driver
For Mac OS X PCL Printer Driver
Set a paper size and paper type of the MP tray from the operator panel. Then, set a paper size, paper tray, and other printing settings
with a printer driver.
Note
Duplex printing is not available for labels.
Loading Labels
When printing on labels, change the paper type setting, and use the MP tray and faceup stacker.
1.
Load labels in the MP tray.
2.
Open the faceup stacker.
3.
Press (SETTING).
4.
Press to select [Paper Setup], and then press
5.
Press to select [MP Tray], and then press
6.
Check that [Paper Size] is selected, and then press
7.
Press to select [A4] or [Letter], and then press
8.
Press to select [Media Type], and then press
9.
Press to select [Labels], and then press
10.
Press until the top screen is displayed.
Next, set printing settings from a printer driver.
For Windows PCL Printer Driver
1.
Open a file.
2.
Select [Print] from the [File] menu.
3.
Click [Preferences].
4.
Select [A4 210x297mm] or [Letter 8.5x11in] from [Size] on the [Setup] tab.
5.
Select [Multipurpose Tray] from [Source].
6.
Change other settings if necessary, and then click [OK].
7.
Click [Print] on the [Print] screen.
Printing starts.
For Windows XPS Printer Driver
1.
Open a file.
2.
Select [Print] from the [File] menu.
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
176