Setting Fax Detection Mode - Oki MB472dn User Manual

Setting Fax Detection Mode

Set the machine so that it can determine whether the sender is sending a fax while the recipient is holding the handset of the external
telephone after picking it up to answer the call when the telephone rings in Tel/Fax Ready mode.
1.
Press (SETTING).
2.
Press to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press to select [Fax Setup], and then press
6.
Press to select [Fax Setting], and then press
7.
Press to select [CNG Detection], and then press
8.
Press to select [ON], and then press
[ON]: The machine detects fax beep signals, and then automatically starts receiving a fax.
[OFF]: If the sender is sending a fax, the machine receives a fax with manual reception.
9.
Press until the top screen is displayed.
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
319