Setting To Use Remote Scan - Oki MB472dn User Manual

Setting to Use Remote Scan

Enable the Network TWAIN function so that you can use the Remote Scan function on a computer.
Note
If you set this function to [OFF], you cannot use the Scan to PC function and Remote Scan.
1.
Press (SETTING).
2.
Press to select [Admin Setup], and then press
3.
Enter the administrator password.
4.
Select [Enter], and then press
5.
Press to select [Scanner Setup], and then press
6.
Press to select [TWAIN Setup], and then press
7.
Check that [Network TWAIN] is selected, and then press
8.
Press to select [ON], and then press
9.
Press until the top screen is displayed.
(OK).
(OK).
(OK).
(OK).
(OK).
82
(OK).