Setting AirPrint (Print/Scan/FaxOut Service)
Connect this machine to the same network as a mobile device.
This machine supports infrastructure mode.
Note
This machine does not support ad-hoc mode.
This machine is connected to a mobile device via wireless access points.
This machine is connected to the access points with a wired or wireless LAN.
If you want to connect with a Wireless LAN, set the wireless LAN in advance.
Connecting to a Wireless LAN (Network Connection)
If using a router or hub as an access point on a wired LAN, connect this machine to the router or hub with a LAN cable.
Connecting with a LAN Cable (Network Connection)
To use AirPrint from a Mac computer, connect this machine to the Mac.
To print by using AirPrint (Print), you must configure settings from the terminal side. Proceed to
261
"Printing with AirPrint
(Print)".