Connecting With Wps - Oki MB472dn User Manual

Connecting with WPS

If a wireless LAN access point supports WPS, you can easily connect to the wireless LAN with the easy setup button (WPS button).
Connect by following the procedure below.
1.
Check the position of the WPS button by referring to the instruction manual that is included in a
wireless access point or other document.
2.
Check that the wireless LAN access points starts and is operating properly.
3.
Turn the machine on.
Memo
If the following screen is displayed, select [Yes], and then proceed to step 6.
4.
Press (SETTING).
5.
Press to select [Wireless Setting], and then press
6.
Enter the administrator password, select [Enter], and then press
The factory default password is "aaaaaa".
The following message is displayed for approximately 5 seconds.
7.
Check that [Automatic Setup (WPS)] is selected, and then press
8.
Press to select [WPS-PBC], and then press
(OK).
(OK).
(OK).
(OK).
804