Ip Filtering - Oki MB472dn User Manual

IP Filtering

Item
Web page Configuration
Tool
(Windows)
Network
Setting Plug-
in
IP Filtering -
Start Address -
1-10
End Address -
1-10
Printing 1-10 -
Configuration -
1-10
Administrator's -
IP Address
setting
Factory Description
default
Network
setting
Card Setup
(Mac OS X)
- Disable Specifies whether to use IP filtering. Be sure to configure the following
settings of this category when you enable IP filtering. If you do not, you
cannot access this machine via TCP/IP.
If IP filtering is enabled, IPv6 communication is not available.
- 0.0.0.0 Specifies IP addresses that are allowed to access this machine. You can
specify an individual address or an address range.
- 0.0.0.0
- Disable Specifies whether to allow print jobs from specified IP addresses.
- Disable Specifies whether to allow settings changes from specified IP addresses.
- 0.0.0.0 Specifies the administrator IP address automatically. Only this address can
always access the machine.
When the administrator accesses this machine via a proxy server, all access
via the proxy server is allowed.
Memo
692