Using a Registered Macro
You can use a macro by reading out it.
1.
Press
(JOB MACRO).
2.
Press
to select a macro to use, and then press
3.
Select [Execute], and then press
4.
Check the setting, and then press
Press
to scroll the screen.
5.
Press
or
If the access control is enabled on the functions you want to use, a message is displayed to inform you that you are not permitted
to use them, and the screen returns to the JOB MACRO menu.
6.
Perform a job.
on the confirmation screen, select [Yes], and then press
(OK).
(OK).
(OK).
461
(OK).