Usb Connection Problems - Oki MB472dn User Manual

The machine was Connect cables before turning the machine on.
turned on before a
cable was connected.
There is a problem Press
with the compatibility
[HUB Link Setting], and then change the setting.
with the hub.
The network This machine cannot connect to a wired LAN and wireless LAN at the same time. To
connection setting is connect to a wired network, set the network connection to wired. To connect to a
incorrect. wireless network, set the network connection to wireless.
Not connected to a
Check that the wireless access point power is switched on.
wireless access point.
Check the wireless access point settings, and then try the manual settings or
automatic settings.
Restart the wireless LAN function.
Press
[Network Setup] > [Wireless Setting], and then select [Wireless reconnection].
For Windows
Cause Solution
The IP address is
Check that the same IP address is set for the machine and the
incorrect.
machine's port setting on the computer.
Check that the IP address is not duplicated by another device.
Check that the correct IP address, subnet mask, and gateway
address are set.
If using OKI LPR Utility, check the IP address setting with OKI LPR
Utility.
All pages are not If you are using the WSD port, change it to the standard TCP/IP
printed. port.

USB connection problems

Common to Windows and Mac OS X
Cause
An unsupported USB cable is
used.
A USB hub is used.
A printer driver is not installed
correctly.
For Windows
Cause
The machine is offline.
A switch, buffer, extension
cable or USB hub is used.
Another printer driver that
works when connected via
a USB interface is installed.
(SETTING), select [Admin Setup] > [Network Menu] > [Network Setup] >
(SETTING), and then select [Admin Setup] > [Network Menu] >
Solution
Use a USB 2.0 cable.
Directly connect the machine to the
computer.
Reinstall the printer driver.
Solution
Right-click the OKI MB472 icon on the [Devices and Printers] folder, and then select
[See print jobs] (if multiple drivers are installed, select [OKI MB472(*)]). In the dialog
box, select the [Printer] menu and then clear the check of [Use Printer Offline].
* Select the required driver type.
Directly connect the machine to the computer.
Remove the other printer driver from the computer.
Reference
-
Connecting a Computer to This Machine via a USB
Interface
Installing a Driver and Software to a Computer
525
Connecting with
a LAN Cable
(Network
Connection)
-
Connecting This
Machine to a
Network
Connecting to a
Wireless LAN
(Network
Connection)
Reference
Setting an IP Address from the Operator
Panel on This Machine
Following the IP Address of the
Registered Printer Automatically
-
Reference
Switching
This
Machine
Online
Connecting
This
Machine to
a Network
-