Saving Toner - Oki MB472dn User Manual

Saving Toner

For Windows PCL Printer Driver
For Windows XPS Printer Driver
For Mac OS X PCL Printer Driver
Printing is possible with less toner.
The amount of toner can be saved in three levels.
[Printer setting]: Conforms to the printer setting.
[Off]: Prints at a normal density without saving toner.
[Save Level Low]: Prints at a somewhat lower density level.
[Save Level Middle]: Prints at a low density.
[Save Level High]: Prints at a very low density.
Note
If using this function, only [Normal (600x600)] or [Draft (600x600)] can be specified as the print quality.
Memo
The density of the image that is printed with this function may vary depending on the printed document.
For Windows PCL Printer Driver
1.
Select [Print] from the [File] menu.
2.
Click [Preferences].
3.
Select the [Setup] tab.
4.
Select the amount of toner to save from [Toner saving].
5.
Change other settings if necessary, and then click [OK].
6.
Click [Print] on the [Print] screen.
Printing starts.
For Windows XPS Printer Driver
1.
Select [Print] from the [File] menu.
2.
Click [Preferences].
3.
Select the [Job Options] tab.
4.
Select the amount of toner to save from [Toner Saving].
5.
Change other settings if necessary, and then click [OK].
6.
Click [Print] on the [Print] screen.
Printing starts.
For Mac OS X PCL Printer Driver
1.
Select [Print] from the [File] menu.
2.
Select [Job Options] from the panel menu.
3.
Select the amount of toner to save from [Toner Saving].
211