Network Menu - Oki MB472dn User Manual

Network Menu

Set the basic settings and other network settings.
1.
Press (SETTING).
2.
Select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press to select [Network Menu], and then press
6.
Change the setting, and then press
7.
Press until the top screen is displayed.
Item
Network Network
Setup Setting
(OK).
(OK).
TCP/IP
NetBIOS over TCP
IP Address Set
IPv4 Address
Subnet Mask
Gateway Address
DNS Server (Primary)
DNS Server (Secondary)
WINS Server (Primary)
WINS Server (Secondary)
Proxy
Proxy Server
Proxy Server Port No.
Proxy User ID
Proxy Password
Web
Telnet
FTP
IPSec
SNMP
(OK).
(OK).
Factory default Description
setting
Enable Sets whether to enable TCP/IP.
Enable Sets whether to enable NetBIOS over TCP/IP.
Display condition: TCP/IP protocol is enabled.
Auto Sets the method of assigning an IP address.
192.168.100.100 Sets an IP address.
Display condition: TCP/IP protocol is enabled.
255.255.255.0 Sets a subnet mask.
Display condition: TCP/IP protocol is enabled.
0.0.0.0 Sets a gateway address.
Display condition: TCP/IP protocol is enabled and the IP
version is not set to IPv6.
0.0.0.0 Sets the IP address for a Primary DNS server.
Display condition: TCP/IP protocol is enabled.
0.0.0.0 Sets the IP address for a Secondary DNS server.
Display condition: TCP/IP protocol is enabled.
0.0.0.0 Sets the name or the IP address for the WINS server.
Display condition: TCP/IP protocol is enabled.
0.0.0.0 Sets the name or the IP address for the WINS server.
Display condition: TCP/IP protocol is enabled.
Disable Sets whether to use proxy.
(NULL) Sets the name or IP address of the proxy server. You can
enter up to 15 characters.
8080 Sets the port number of the proxy server.
(NULL) Sets the user ID to connect to the proxy server.
(NULL) Sets the password to connect to the proxy server.
Enable Sets whether to enable access from a Web browser.
Display condition: TCP/IP protocol is enabled.
Disable Sets whether to enable access from the Telnet.
Display condition: TCP/IP protocol is enabled.
Disable Sets whether to enable access with FTP.
Display condition: TCP/IP protocol is enabled.
Disable This item is displayed only if IPSec is set to valid. This
item can be changed to disable only.
Enable Sets whether to enable access from SNMP.
Display condition: TCP/IP is enabled.
594