Editing An E-Mail - Oki MB472dn User Manual

Editing an E-mail

1.
Press (FAX).
2.
Set a document in the ADF or on the document glass.
3.
Press to select [Internet Fax], and then press
4.
Press to select [Scan Setting], and then press
5.
Press to select [Edit E-mail], and then press
6.
Check that [Subject] is selected, and then press
7.
Select [Select Subject] or [Direct Input], and then press
8.
Select a subject.
If you select [Direct Input] in step 7, enter a subject.
Memo
When directly entering, you can enter up to 80 characters.
Entering Characters
9.
Press to select [E-mail Body], and then press
10.
Select [Select Text] or [Direct Input], and then press
11.
Select an e-mail body.
If you select [Direct Input] in step 10, enter e-mail body.
Memo
When directly entering, you can enter up to 256 characters.
12.
Specify a destination.
Specify a destination in one of the following ways.
Using Direct Entry
Selecting from the Address Book or Group List
Using a One-touch Key
Selecting from the Transmission History
Specify a Destination by Searching the LDAP Server
13.
Press (START).
Transmission starts.
Topics
Specifying a Subject and Body Text
You can change other settings for fax transmissions.
Setting Scanning for Transmission
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
362