Printing On Custom Size Paper - Oki MB472dn User Manual

Printing on Custom Size Paper

Loading Custom Size Paper
For Windows PCL Printer Driver
For Windows XPS Printer Driver
For Mac OS X PCL Printer Driver
Set a custom paper size and paper type on the operator panel. Then, register a paper size with a printer driver.
Available paper size
Tray 1
Tray 2 (Optional)
MP tray
Note
Register paper in portrait, and load paper in a tray in portrait.
If the paper length exceeds 356 mm (14 inches), use the faceup stacker.
This function may not be available for some applications.
If the paper length exceeds 356 mm (14 inches), the print quality cannot be guaranteed.
If paper is so long that it exceeds the paper supports of the MP tray, support the paper with your hands.
It is not recommended to use a paper width of less than 86 mm (3.4 inches), because paper jams may result.
About available paper sizes for each tray and for duplex printing
About Paper Types That Can be Loaded and Storage Methods
The auto tray switch function is set to [ON] by factory default. When a tray runs out of paper during printing, another tray
automatically starts feeding paper. To feed custom size paper from a specified tray, set the auto tray switch function to [OFF].
Loading Custom Size Paper
When printing on custom paper size, change the paper type setting, and specify a paper tray.
1.
Load paper that can be set to the custom size in Tray 1 or Tray 2 (optional).
2.
Press (SETTING).
3.
Press to select [Paper Setup], and then press
4.
Press to select [Tray 1] or [Tray 2], and then press
5.
Check that [Paper Size] is selected, and then press
6.
Press to select [Custom], and then press
7.
Enter a width and length of paper in [Width] and [Length] by using the 10-key pad, and then press
(OK).
8.
Set other settings if necessary, and then press
9.
Press until the top screen is displayed.
For Windows PCL Printer Driver
1.
Click [Start], and then select [Devices and Printers].
2.
Right-click the OKI MB472 icon, and then select [Printing Preferences] > [OKI MB472(PCL6)].
3.
Click [Paper Feed Options] on the [Setup] tab.
4.
Click [Custom Size].
Width 100 to 216 mm, Length 148 to 356 mm
Width 148 to 216 mm, Length 210 to 356 mm
Width 86 to 216 mm, Length 140 to 1321 mm
(OK).
181
(OK).
(OK).
(OK).
(OK).