Wireless Setting - Oki MB472dn User Manual

Wireless Setting

Set a wireless LAN.
1.
Press (SETTING).
2.
Select [Wireless Setting], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Change the setting, and then press
5.
Press until the top screen is displayed.
Item
Admin Automatic Setup
Password (WPS)
Wireless Network
Selection
Wireless reconnection
Memo
If the wireless setting is enabled, [Enabling Wired Communications] is displayed under the wireless setting. If the network card cannot
operate, the setting is not displayed.
(OK).
(OK).
WPS-PBC
WPS-PIN
A list of access points' names found in the
search
Manual Setup SSID
Security
WPA Encryption Type
WPA Pre-shared Key
578
Description
WPS-PBC is executed.
WPS-PIN is executed.
Displays a list of access points' names found in
the search.
Enter an SSID.
Selects the security of the wireless LAN function.
"WPA2-EAP" can set only on the Web.
Select a WPA2-PSK encryption type.
Displays if [WPA2-PSK] is selected for [Security].
Enter a pre-shared key.
Displays if [WPA2-PSK] is selected for [Security].
Wireless reconnection is executed.