Specify A Destination By Searching The Ldap Server; For Simple Search; For Advanced Search - Oki MB472dn User Manual

Specify a Destination by Searching the LDAP Server

For Simple Search

For Advanced Search

You can search for a destination from a list on the LDAP server. There are two search methods, as shown below.
[Simple Search]: You can run a search with only one keyword as a user name. You can only search for character strings included in
usernames, and not in e-mail addresses.
[Advanced Search]: You select search conditions to search for items that include all the specified keywords or any of the keywords.
You can specify user names or e-mail addresses as search keywords.
Up to 100 search results are displayed.
For details on setting the LDAP server, refer to
Memo
Set an e-mail address in the following steps.
A destination of scanned data: Step 6 in
A reply destination of a received e-mail: Step 9 in "Setting a Reply Address" in
For Simple Search
1.
Press to select [LDAP], and then press
2.
Check that [Simple Search] is selected, and then press
3.
Enter a keyword to search for a user name in the LDAP server.
4.
Select [Enter], and then press
5.
When the search results are displayed, press
The selected destination check box is selected. You can select multiple items.
6.
When you complete the selection of all the destinations, press
7.
Check that [Complete] is selected, and then press
8.
Press to return to the start screen.
For Advanced Search
1.
Press to select [LDAP], and then press
2.
Press to select [Advanced Search], and then press
3.
Check that [Search Method] is selected, and then press
4.
Select [OR] or [AND], and then press
5.
Press to select [User name], and then press
6.
Enter the keyword to search for.
7.
Select [Enter], and then press
"Setting the LDAP Server".
"Using Scan to E-mail"
(OK).
(OK) to start searching.
to select a destination, and then press
(OK).
(OK).
.
(OK).
59
"Specifying a Sender and Reply
(OK).
.
(OK).
(OK).
.
Destination"
(OK).