Printing To Fit The Paper Size (Fitting) - Oki MB472dn User Manual

Printing to Fit the Paper Size (Fitting)

If the page size of a file to print is larger or smaller than the valid printing area, the page size is automatically adjusted to fit the paper
size.
Note
When printing a PRN file, this setting does not work.
Memo
This function is set to [ON] by factory default.
1.
Insert USB Memory into the USB port.
Note
Insert USB Memory straight into the USB port. Inserting USB Memory at a wrong angle may damage the USB port.
2.
Press (PRINT).
3.
Press to select [Print From USB Memory], and then press
4.
Check that [Select Print File] is selected, and then press
If a file to print is not saved in the folder, proceed to step 7.
5.
Press to select the folder that has the file to print, and then press
6.
Check that [Open Folder] is selected, and then press
Repeat steps 5 and 6 until the file to print is displayed.
Memo
To check the folder information, select [Folder Property].
7.
Press to select the file to print, and then press
8.
Press to select [Select a file], and then press
Memo
To check the file information, select [File Property].
9.
Press to select [Print Setup], and then press
10.
Press to select [Fit], and then press
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
235
(OK).
(OK).