Adjusting The Density - Oki MB472dn User Manual

Adjusting the Density

You can adjust the density in seven levels.
1.
Press (SCAN).
2.
Set a document in the ADF or on the document glass.
3.
Select a scan type from [Scan Menu], and then press
4.
Press to select [Scan Setting], and then press
5.
Press to select [Image Settings], and then press
6.
Check that [Density] is selected, and then press
7.
Press or
Available density settings
+3, +2, +1,
* indicates the factory default setting.
8.
Press or
Scanning starts.
to select a density value, and then press
0*, -1, -2, -3
.
(OK).
(OK).
(OK).
(OK).
(OK).
107