Specifying a Sender and Reply Destination
Setting a Sender's Address
Setting a Reply Address
Setting a Sender's Address
1.
Press
(SETTING).
2.
Press
to select [Admin Setup], and then press
3.
Enter the administrator password.
4.
Select [Enter], and then press
5.
Press
to select [Scanner Setup], and then press
6.
Press
to select [E-mail Setup], and then press
7.
Press
to select [From / Reply To], and then press
8.
Press
to select [From], and then press
9.
Enter an e-mail address.
10.
Select [Enter], and then press
11.
Press
until the top screen is displayed.
Setting a Reply Address
1.
Press
(SETTING).
2.
Press
to select [Admin Setup], and then press
3.
Enter the administrator password.
4.
Select [Enter], and then press
5.
Press
to select [Scanner Setup], and then press
6.
Press
to select [E-mail Setup], and then press
7.
Press
to select [From / Reply To], and then press
8.
Press
to select [Reply To], and then press
9.
Specify a destination.
10.
Press
until the top screen is displayed.
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
62
(OK).
(OK).