Block Junk Fax; Registering (If Selecting [Off] Or [Mode1]); Registering (If Selecting [Mode2] Or [Mode3]) - Oki MB472dn User Manual

Block Junk Fax

Registering (If Selecting [OFF] or [Mode1])

Registering (If Selecting [Mode2] or [Mode3])

Deleting a Registered Number
You can block unwanted faxes by setting to receive faxes only from registered the speed dial numbers, or rejecting reception from
specific registered numbers.
There are three ways to block unwanted faxes.
Mode Description
Mode 1
Mode 2
Mode 3
OFF
: Incoming numbers
: Numbers that are registered in the speed dial numbers
: The numbers that are registered to block junk faxes
White shapes indicate that reception is allowed, and gray shapes indicate that reception is rejected.
Registering (If Selecting [OFF] or [Mode1])
1.
Press (SETTING).
2.
Press to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press to select [Fax Setup], and then press
6.
Press to select [Other Settings], and then press
7.
Press to select [Block Junk Fax List], and then press
8.
Select [Setting], and then press
9.
Press to select [OFF] or [Mode1], and then press
Registering (If Selecting [Mode2] or [Mode3])
Register the numbers of the senders from whom you want to block junk faxes.
This mode rejects the senders who are not registered in the speed dial numbers.
If the last four digits of a registered fax number match the sender ID, reception is allowed.
This mode rejects the senders with the numbers that are registered to [Block Junk Fax List].
Register four to eight digits of a fax number.
You can enter up to 10 numbers.
This mode is a combination of Mode 1 and Mode 2.
This mode rejects reception from the senders who are not registered in the speed dial numbers.
This mode also rejects reception from the senders who are registered to block junk faxes.
Junk faxes are not blocked.
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
325