Setting to Use Scan to PC
Enable the Network TWAIN function so that you can use the Scan to PC function on a computer that is connected via a network.
1.
Press
(SETTING).
2.
Press
to select [Admin Setup], and then press
3.
Enter the administrator password.
4.
Select [Enter], and then press
5.
Press
to select [Scanner Setup], and then press
6.
Press
to select [TWAIN Setup], and then press
7.
Check that [Network TWAIN] is selected, and then press
8.
Press
to select [ON], and then press
(OK).
(OK).
(OK).
(OK).
(OK).
68
(OK).