Setting Auto Power Off
When the machine is connected to a network or a telephone cable is connected, set the following settings to set Auto Power Off.
You can register Auto Power Off in the following three ways.
Opening the Web Page of This Machine from a Computer
This section describes how to set Auto Power Off from the Web page. You must enter the administrator password to set this setting.
Using Configuration Tool (Windows Only)
This section describes how to set Auto Power Off from Configuration Tool. You must enter the administrator password to set this
setting.
Using the Operator Panel
This section describes how to set Auto Power Off from the operator panel of this machine. You must enter the administrator password
to set this setting.
455