Setting A Reception Mode - Oki MB472dn User Manual

Setting a Reception Mode

The most appropriate reception mode varies depending on the environment where you use the machine. Check with the following
description.
[Fax Ready Mode] is set by factory default.
[Fax Ready Mode]
If you use the machine only for faxes, this mode is recommended.
[Tel/Fax Ready Mode]
If you connect a telephone, this mode is recommended.
[Ans/Fax Ready Mode]
If you connect an answering machine, this mode is recommended.
[Tel Ready Mode]
If you often use the machine as a telephone, this mode is recommended.
[DRD]
If you use the distinctive ring detection (DRD) function that is provided by a telephone company, this mode is recommended.
1.
Press (SETTING).
2.
Press to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Select [Enter], and then press
5.
Press to select [User Install], and then press
6.
Press to select [Reception Mode], and then press
7.
Press to select the reception mode, and then press
Available reception mode settings:
Fax Ready Mode*,
* is the factory default setting.
8.
Press until the top screen is displayed.
Topics
About Reception Modes
(OK).
Tel/Fax Ready Mode, Ans/Fax Ready Mode,
(OK).
(OK).
(OK).
(OK).
Tel Ready Mode,
966
DRD