Adjusting RGB (RGB)
This section describes how to change the default setting of RGB when scanning.
1.
Press
(SETTING).
2.
Press to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press to select [Scanner Setup], and then press
6.
Press to select [Default Settings], and then press
7.
Press
to select [Image Settings], and then press
8.
Press
to select [RGB], and then press
9.
Press
or
10.
Repeat step 5 until you complete adjusting all the colors, and then press
(OK).
to select a value, and then press
(OK).
(OK).
(OK).
(OK).
(OK).
to set a different color.
720
(OK).