Copying Different Size Documents (Mixed Size) - Oki MB472dn User Manual

Copying Different Size Documents (Mixed Size)

You can set multiple documents having the same width but different lengths in the ADF so that they can be copied on their respective
paper sizes.
Note
You can use this mixed-size function only if the document is a combination of Letter and Legal 14, Letter and Legal 13.5, or Letter
and Legal 13.
If [Mixed Size] is enabled, [Paper Feed] cannot be selected. The paper tray that matches the document is automatically selected to
feed the paper.
[Mixed Size] is available only if [Zoom] is set to [Fit to page(98%)] or [100%].
You cannot set [Edge Erase] and [Mixed Size] at the same time.
To use multiple sheets of paper, press
tray.
When you use the MP tray, load paper in the MP tray, and then display the [Mixed Size] menu.
Memo
This section covers an example of Legal 14 loaded in Tray 1 and Letter loaded in the MP tray.
1.
Load Legal 14 paper in Tray 1, and then load Letter paper in the MP tray.
Memo
You can use only standard paper for this function.
2.
Press (SETTING).
3.
Press to select [Paper Setup], and then press
4.
Select [Legal 14] for [Paper Size] of Tray 1, and then select [Letter] for [Paper Size] of the MP tray.
5.
Press until the top screen is displayed.
6.
Press (COPY).
7.
Set a document that is mixed with Letter and Legal 14 sizes in the ADF.
Setting in the ADF
8.
Press to display the [Change Settings] menu.
9.
Press to select [Mixed Size], and then press
10.
Press to select [ON], and then press
11.
Press until the copy start screen is displayed.
12.
Check that the following settings are displayed on the copy start screen.
[Mixed Size]: ON
[Paper Feed]: Auto
[Zoom]: 100%
[Scan size]: Legal 14
13.
Enter the number of copies by using the 10-key pad if necessary.
14.
Press (START).
Copying starts.
(SETTING), and then select [Paper Setup]>[Select Tray]>[Copy] to enable the MP
(OK).
(OK).
(OK).
40