Configuring Fax Settings; Changing Scan Size (Scan Size); Changing Resolution (Resolution); Adjusting Density (Density) - Oki MB451wMFP User Manual

Configuring Fax Settings

Configuring Fax Settings

You can configure the fax settings to alter the output to suit your needs. Each setting can be configured
from the [Fax Functions] menu on the fax start screen.
Perform the following procedures at step 6 of

Changing Scan Size (Scan Size)

You can select the appropriate scan size for your
document.
Press the to select [Fax Functions]
1
on the fax start screen and then press
.
OK
Check that [Scan Size] is selected and
2
then press .
OK
Press the to select a size and then
3
press .
OK
Settable Size Values:
A4* Letter Legal 13
Legal 14
*indicates the factory default.
Press the until the fax standby screen
4
appears.
Changing Resolution
(Resolution)
You can select an appropriate resolution to scan
your fax document to get optimum image quality.
Press the to select [Fax Functions]
1
on the fax standby screen and then
press .
OK
Press the to select [Resolution] and
2
then press .
OK
Press the to select a resolution and
3
then press .
OK
Settable Resolution:
Normal* Fine
*indicates the factory default.
Memo
 [Extra-Fine] may be unavailable depending on the
recipient machine.
 In the [Fine], [Extra-Fine], or [Photo] mode,
scanning takes longer.
Press the until the fax standby screen
4
appears.
Legal 13.5
Extra-Fine Photo
"Sending a Fax" P. 85

Adjusting Density (Density)

You can adjust the scan density from 7 levels.
Press
1
fax standby screen and then press
Press the
2
then press
Press the
3
then press
Values:
+3
Memo
 [0] is the standard value. To darken the document
image, select [+1], [+2] or [+3] (most dense).
Conversely, to lighten the document image, select
[- 1], [-2] or [-3] (least dense).
Press the
4
appears.

Printing the Sender Name

You can set the machine to print a sender name
on faxes you send. By default, the name you
specified in [Sender ID] is printed.
Reference
 For details on [Sender ID], refer to
Information" P.
Press the
1
on the fax standby screen and then
press
OK
Press the
2
press
OK
Press the
3
press
OK
Press the
4
appears.
Reference
 For details on how to register a sender name and change
the sender name to be used, refer to the Use's Manual
Advanced.
- 88 -
described above.
to select [Fax Functions] on the
to select [Density] and
.
OK
or to select a density and
.
OK
+2 +1 0* -1 -2
*indicates the factory default.
until the fax standby screen
"Specifying Sender
44.
to select [Fax Functions]
.
to select [TTI] and then
.
to select [ON] and then
.
until the fax start screen
.
OK
-3