Copying starts.
Topics
You can change other copy settings.
Changing Settings before Copying
Copying with Margins on Both Sides
When you make duplex copies with [Margin] enabled, you must specify the [Back] margin.
1.
Press
(COPY).
2.
Set a document in the ADF or on the document glass.
3.
Set duplex copy.
Copying on Both Sides of Paper (Duplex Copy)
4.
Press
to display the [Change Settings] menu.
5.
Press
to select [Margin], and then press
6.
Press
to select [ON], and then press
7.
To set the left or right margin, press
.
To create a margin on the left side of the output, specify a positive value.
To create a margin on the right side of the output, specify a negative value.
8.
Likewise, press
To create a margin on the left side of the output, specify a positive value.
To create a margin on the right side of the output, specify a negative value.
Memo
Specify the same absolute value set in the [Left] margin for both the [Front] and [Back] margins.
9.
To set the top or bottom margin, press
.
To create a margin at the top of the output, specify a positive value.
To create a margin at the bottom of the output, specify a negative value.
10.
Press
or
to specify the [Top] margin for [Back], and then press
To create a margin at the top of the output, specify a positive value.
To create a margin at the bottom of the output, specify a negative value.
Memo
Specify the same absolute value set in the [Top] margin for both the [Front] and [Back] margins.
11.
Press
(START).
Copying starts.
Memo
and
, specify a margin in [Left] of [Back], and then press
(OK).
(OK).
and
, specify a margin in [Left] of [Front], and then press
and
, specify a margin in [Top] of [Front], and then press
43
.
(OK).