Oki MB472dn User Manual page 147

For Mac OS X
Scanning
Changing Settings in Simple Mode
Changing Settings in Advanced Mode
Note
To use this function, a TWAIN compatible application (such as Adobe Photoshop CS3) must be installed.
Memo
This section uses Adobe Photoshop CS3 as an example.
This section describes the procedure when using Remote Scan with a USB connection. For details on network connections and how
to start scanning with Scan to PC, refer to
Scanning
1.
Set a document in the ADF or on the document glass.
2.
Start Adobe Photoshop on the computer.
3.
Select [Import] from [File], and then select [OKI MB5(4)x2_ES5(4)1x2 USB] or [OKI
MB5(4)x2_ES5(4)1x2 Network].
If you select [OKI MB5(4)x2_ES5(4)1x2 USB], proceed to step 7.
If you select [OKI MB5(4)x2_ES5(4)1x2 Network] and you perform a network scan after the first time, proceed to step 7.
4.
When you perform a network scan for the first time, click [OK] in the dialog box that is displayed to
inform you that the connection destination selection tool starts.
5.
In the [Scan Settings] dialog box, select the connection destination, register host information if
necessary, and then click [OK].
6.
Select [Import] from [File] of Adobe Photoshop, and then select [OKI MB5(4)x2_ES5(4)1x2 Network].
7.
Click a scan button.
Scanning starts.
8.
Select [Quit Photoshop] from [Photoshop].
Changing Settings in Simple Mode
You can adjust how a document is scanned by changing the driver settings.
The following explains each setting item.
You can change the settings of five registered buttons.
1.
Set a document in the ADF or on the document glass.
2.
Start Adobe Photoshop CS3 from a computer.
3.
Select [Import] from [File], and then select [OKI MB5(4)x2_ES5(4)1x2 USB]or [OKI
MB5(4)x2_ES5(4)1x2 Network].
4.
When you perform a network scan for the first time, click [OK] in the dialogbox that is displayed to
inform you that the connection destination selectiontool starts.
5.
In the [Scan Settings] dialog box, select the connection destination, register host information if
necessary, and then click [OK].
"Sending Scanned Data to a
146
Computer".