Oki MB472dn User Manual page 588

Edge Erase
E-mail File Name
Setup
Template
From /
Reply To
Broadcast Destination
MDN Response
A/R Full Print
MCF Report
Timeout of MCF Report
Print Check Message
USB File Name
Memory
Setup
TWAIN Network TWAIN
Setup
2
Port No.*
WSD Scan WSD Scan
Setup
Binding
PC Scan PC Scan Mode
Mode
Scanner Execute
Calibration
*1
For profiles, "#n" or "#d" can be specified for [File Name].
If specifying "#n": 5-digit serial number from 00000 to 99999
If specifying "#d": Date and time when a file is created. 12-digit number in yymmddhhmmss format
yy: Year created (the last two digits of the Christian Era)
mm: Month created (01 to 12)
dd: Date created (01 to 31)
* The date and time when a file is created are values of the timer of MB472.
An example of file name specification (if the file format is PDF)
If specifying "DATE#n": Saved as file names such as "Data0000.pdf" and "Data00001.pdf".
Mono (Binary) High
Setting OFF
Width 5 mm
(0.2 inch)
(NULL)
Edit Subject (NULL)
Edit Body (NULL)
From (NULL)
E-mail Sender (NULL)
ID
Reply Address (NULL)
To Book
Direct (NULL)
Input
LDAP (NULL)
ON
OFF
OFF
OFF
15 minutes Sets the timeout for printing a confirmation after transmission of Internet fax
OFF
(NULL)
ON
9967
Enable
Long Edge
Bind
Simple
Scan Mode
Sets whether to erase the edge shadow created in the surrounding of 2-page
spread documents.
Sets an erasing width.
Available range: 5 to 50 mm (0.2 to 2.0 inches)
Sets a file name. You can enter up to 64 one-byte characters.
The following options can be set.*
#n: adding a serial number from 00000 to 99999
#d: adding the date of a file creation (yymmddhhmmss)
(yymmddhhmmss)
Registers or edits e-mail subject text. You can enter up to 80 characters.
Registers or edits e-mail body. You can enter up to 256 characters.
Sets the e-mail address that is displayed in the [From] field. You can enter up
to 80 characters.
Sets the sender name that is displayed in the [From] field. You can enter up
to 32 characters.
Sets the e-mail address that is displayed in the [Reply to] column. You can
enter up to 80 characters.
Sets whether an e-mail address confirmation screen is displayed before
broadcasting the e-mail.
Sets whether to request the MDN (message disposition notification) response.
Set whether to print the transmission and reception history reports
automatically.
Sets whether to print a confirmation after transmission of Internet fax and
Scan to E-mail.
and Scan to E-mail. If the setting period of time is exceeded, the report is
automatically printed without the MDN response.
Sets whether to report the error content if a transmission error occurs.
Sets the default file name. You can enter up to 255 characters.
The following options can be set as the default file name.*
#n: adding a serial number from 00000 to 99999
#d: adding the date of a file creation (yymmddhhmmss)
(yymmddhhmmss)
Sets whether to use the Network TWAIN.
Sets the port number.
Available range: 1 to 65535
Specifies whether to use WSD Scan.
Sets the default binding position.
Selects the default PC scan mode.
Starts a scanner calibration.
587
1
1
hh: Hours created (00 to 23)
mm: Minute created (00 to 59)
ss: Second created (00 to 59)