Printing Transmission Results Automatically (Transmit Confirmation Report)
Set whether to automatically print transmission results.
Memo
To change the default value, change it from [Admin Setup] > [Fax Setup] > [Default Settings] > [Transmit Confirmation Report].
1.
Press
(FAX).
2.
Set a document in the ADF or on the document glass.
3.
Check that [Fax] is selected, and then press
4.
Press
to select [Fax Functions], and then press
5.
Press
to select [Transmit Confirmation Report], and then press
6.
Press
to select [ON], and then press
7.
Press
until the start screen is displayed.
8.
Specify a destination.
Specify a destination in one of the following ways.
Using Direct Entry
Selecting from the Phone Book
Using a One-touch Key
Selecting from the Transmission History and Reception History
9.
Press
(START).
Transmission starts.
Topics
You can change other settings for fax transmissions.
Setting Scanning for Transmission
Sending a Fax
(OK).
(OK).
(OK).
299
(OK).