Job List - Oki MB472dn User Manual

WSD Scan Setup
PC Scan Mode
Print From USB Memory Setup
Set Print From USB Memory.
Print Setup
Item
Print Print Setup
Menu
Printer
Adjust
Print
Position
Adjust
Drum
Cleaning
Hex Dump
System Configuration
Menu
Emulation PCL Setup
XPS Setup
IBM PPR
Setup
EPSON FX
Setup
Management
You can set local interface, system settings, power save mode, memory setting, change password, default value reset, or other device
settings.
Item
Local Interface USB Menu Sets USB.
System Setup
Power Save
Memory Setup
Admin Password
Reset Settings
User Install
Item Description
Power Setup Sets Auto power off and Power supply Return.
Fax Setup Sets a fax line, sender, and other settings.
Time Setup Sets the time to the machine.
Other Settings Sets High humid mode and Quiet mode.

Job List

Sets WSD Scan.
Sets PC Scan mode.
Description
Sets the number of copies, resolution, and other settings. When using the printer driver, the values that
are set with the printer driver are given priority over these settings.
Sets manual timeout, jam recovery, and other print adjustment settings.
Adjusts front X, front Y, back X and back Y positions.
Sets cleaning of an image drum.
Displays all the received print data in hex. To exit this mode, restart the machine.
Sets operation modes, alarm release, and other machine operation settings for each situation.
Sets PCL.
Sets XPS.
Sets IBM PPR Setup.
Sets EPSON FX Setup.
Description
Sets access control, display units, and other settings.
Sets power save settings.
Sets the reception buffer size and resource save area.
Sets an administrator password.
Initializes all the data that is set in "Management", including speed dial, copy and fax function settings.
Note
If you select [Auto], you cannot set the time from the operator panel.
419