Setting The Country Code - Oki MB472dn User Manual

Setting the Country Code

Note
Select the correct country code.
If [Country Code] is set to an incorrect value, fax transmissions and receptions may not function correctly. If a fax transmission or
reception fails even with the correct line connection, check [Country Code] first.
1.
Turn the machine on.
Turning the Machine On
2.
Press (SETTING).
3.
Press to select [Admin Setup], and then press
4.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
5.
Select [Enter], and then press
6.
Press to select [Fax Setup], and then press
7.
Press to select [Fax Setting], and then press
8.
Press to select [Country Code], and then press
9.
Press or
Memo
If your country is the Czech Republic or Slovak Republic, select [Czech/Slovakia].
If your country is Canada, select [U.S.A].
If the region of your country is Latin America, select [Latin America].
If the region of your country is Europe or Middle East, select [International].
The following country codes can be set.
U.S.A., International, United Kingdom, Ireland, Norway, Sweden, Finland, Denmark, Germany, Hungary, Czech/Slovakia,
Poland, Switzerland, Austria, Belgium, Netherlands, France, Portugal, Spain, Italy, Greece, Australia, New Zealand, Singapore,
Hong Kong, Latin America, Mexico, China, Russia, Taiwan, Japan, Korea, Thailand, Malaysia, Jordan, Argentina, Brazil, South
Africa, Belarus, Moldova, Turkey, Ukraine
10.
When a confirmation message is displayed, press
The machine automatically restarts and the default screen is displayed a few minutes later.
11.
Turn the machine off.
Turning the Machine Off
Memo
If [Country Code] is changed, the values of [PBX Line] and [MF(Tone)/DP(Pulse)] are changed to the default value of each
country.
(OK).
to select a country name, and then press
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
949