Easy Setup - Oki MB472dn User Manual

Easy Setup

In [Easy Setup], you can change the settings of date/time, fax, network, e-mail function by using
1.
Press (SETTING).
2.
Select [Easy Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Change the setting, and then press
is complete.
6.
Press (OK) to complete the setup.
Item
Date/Time Time Zone
Setting
Daylight Saving
Server
Manual Date
Fax Setting Fax Number
Sender ID
Network IP Address
Setting
Subnet Mask
Default Gateway
DNS Server (Primary)
DNS Server (Secondary)
WINS Server (Primary)
WINS Server (Secondary)
E-mail Setting Mail Server Address
Set Sender's Address (from)
Receive Setting
Authentication Method
SMTP User ID
SMTP Password
POP3 Server
POP User ID
POP Password
(OK).
Description
Sets the GMT time zone.
Sets daylight saving to ON or OFF.
SNTP Server Sets the SNTP server to use for setting the current date and time. You can enter up to
(Primary) 64 characters.
SNTP Server
(Secondary)
Sets the current date and time manually.
Time
Sets the fax number of this machine. You can enter up to 40 digits.
Sets the sender's information. You can enter up to 22 characters.
Sets the IP address. You can enter up to 15 characters.
Sets the subnet mask. You can enter up to 15 characters.
Sets the gateway address. You can enter up to 15 characters.
Sets the IP address for a Primary DNS server. You can enter up to 15 characters.
Sets the IP address for a Secondary DNS server. You can enter up to 15 characters.
Sets the name or the IP address for the WINS server. You can enter up to
15 characters.
Sets the name or the IP address for the WINS server. You can enter up to
15 characters.
Sets the IP address or host name for the SMTP server. You can enter up to
64 characters.
Sets an e-mail address for this machine.
Sets the protocol to be used for receiving e-mails.
Sets the authentication method.
Sets the login ID to the server used for SMTP authentication. You can enter up to
64 characters.
Sets the password to the server used for SMTP authentication. You can enter up to
64 characters.
Sets the IP address or host name for the POP3 server. You can enter up to
64 characters.
Sets the login ID to the server used for POP authentication. You can enter up to
64 characters.
Sets the password to the server used for POP authentication. You can enter up to
16 characters.
(OK).
(OK) until a message is displayed to inform you that the setting
574
(SETTING).