Setting Secure Reception (If You Do Not Set A Password); Setting Secure Reception (If You Set A Password); Printing An Image Stored With Secure Reception - Oki MB472dn User Manual

Setting Secure Reception

Setting Secure Reception (If You Do Not Set a Password)

1.
Press (SETTING).
2.
Press to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press to select [Fax Setup], and then press
6.
Press to select [Security Function], and then press
7.
Press to select [Secure Receive], and then press
8.
Press to select [Setting], and then press
9.
Press to select [ON], and then press
10.
Press until the top screen is displayed.

Setting Secure Reception (If You Set a Password)

1.
Press (SETTING).
2.
Press to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press to select [Fax Setup], and then press
6.
Press to select [Security Function], and then press
7.
Press to select [Secure Receive], and then press
8.
Press to select [Setting], and then press
9.
Press to select [ON], and then press
10.
Press to select [Password], and then press
11.
Enter a 4-digit password by using the 10-key pad, and then press
12.
Press until the top screen is displayed.

Printing an Image Stored with Secure Reception

Print an image that is received by fax and stored in memory.
Check that the [DATA IN MEMORY] lamp lights up.
If the lamp is off, there are no images that are received by fax and stored in memory.
1.
Press (SETTING).
2.
Press to select [Store Document Settings], and then press
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
323
(OK).
(OK).
(OK).
(OK).