Clock Generator Control Register; Subsystem Clock Feedback Resistor - NEC PD78076 User Manual

7.3 Clock Generator Control Register

The clock generator is controlled by the following two registers:
• Processor clock control register (PCC)
• Oscillation mode selection register (OSMS)
(1) Processor clock control register (PCC)
The PCC selects a CPU clock and the division ratio, determines whether to make the main system clock
oscillator operate or stop, and enables or desables the subsystem clock oscillator internal feedback resistor.
The PCC is set with a 1-bit or 8-bit memory manipulation instruction.
RESET input sets the PCC to 04H.
CHAPTER 7 CLOCK GENERATOR
Figure 7-2. Subsystem Clock Feedback Resistor
FRC
P-ch
Feedback resistor
XT1 XT2
167