Serial Interface Channel 0 Control Registers - NEC PD78076 User Manual

Pd78078 series; pd78078y series 8-bit single-chip microcontrollers

Table of Contents

CHAPTER 17 SERIAL INTERFACE CHANNEL 0 ( PD78078 SUBSERIES)

17.3 Serial Interface Channel 0 Control Registers

The following four types of registers are used to control serial interface channel 0.

• Timer clock select register 3 (TCL3)

• Serial operating mode register 0 (CSIM0)

• Serial bus interface control register (SBIC)

• Interrupt timing specify register (SINT)

(1) Timer clock select register 3 (TCL3)

This register sets the serial clock of serial interface channel 0.

TCL3 is set with an 8-bit memory manipulation instruction.

RESET input sets TCL3 to 88H.