8-Bit Timer/Event Counters 5 And 6 Operations; Interval Timer Operations; Bit Timer Mode Control Register Settings For Interval Timer Operation; Interval Timer Operation Timings - NEC PD78076 User Manual

10.4 8-Bit Timer/Event Counters 5 and 6 Operations

10.4.1 Interval timer operations

Setting the 8-bit timer mode control registers (TMC5 and TMC6) as shown in Figure 10-8 allows operation as
an interval timer. Interrupt requests are generated repeatedly using the count value preset in 8-bit compare registers
(CR50 and CR60) as the interval.
When the count value of the 8-bit timer register 5 or 6 (TM5, TM6) matches the value set to CR50 or CR60,
counting continues with the TM5 or TM6 value cleared to 0 and the interrupt request signal (INTTM5, INTTM6) is
generated.
Count clock of the 8-bit timer register 5 (TM5) can be selected with the timer clock select register 5 (TCL5) and
count clock of the 8 bit timer register 6 (TM6) can be selected with the timer clock select register 6 (TCL6).
For the operation in the case the value of the compare register is changed during the timer count operation, refer
to 10.5 8-Bit Timer/Event Counters 5 and 6 Precautions (3).
Figure 10-8. 8-Bit Timer Mode Control Register Settings for Interval Timer Operation
TCEn TMCn6
TMCn 1 0
Remarks 1. 0/1 : Setting 0 or 1 allows another function to be used simultaneously with the interval timer.
See 10.3 (3), (4) for details.
2. n = 5, 6
t
Count Clock
TMn Count Value 00
CRn0
TCEn
Count Start
INTTMn
TOn
Remarks 1. Interval time = (N + 1) x t : N = 00H to FFH
2. n = 5, 6
CHAPTER 10 8-BIT TIMER/EVENT COUNTERS 5 AND 6
LVSn LVRn TMCn1 TOEn
0 0 0/1 0/1 0/1
Figure 10-9. Interval Timer Operation Timings
01 N 00
Clear
N N
Interrupt Request Acknowledge
Interval Time
0/1
Clear and start on match of TMn and CRn0
TMn operation enable
01 N 00
Clear
N
Interrupt Request
Acknowledge
Interval Time
01 N
N
Interval Time
259