Format Of Interrupt Request Flag Register 1L; Format Of Interrupt Mask Flag Register 1L - NEC PD78076 User Manual

(1) Interrupt request flag register 1L (IF1L)
It indicates whether a clock timer overflow is detected or not.
It is set by a 1-bit memory manipulation instruction and 8-bit memory manipulation instruction.
It is set to 00H by the RESET signal input.
Figure 22-19. Format of Interrupt Request Flag Register 1L
Symbol <7> 6
IF1L WTIF 0 0
Caution Set bits 5 and 6 to 0.
(2) Interrupt mask flag register 1L (MK1L)
It is used to set the standby mode enable/disable at the time the standby mode is released by the clock timer.
It is set by a 1-bit memory manipulation instruction and 8-bit memory manipulation instruction.
It is set to FFH by the RESET signal input.
Figure 22-20. Format of Interrupt Mask Flag Register 1L
Symbol <7> 6 5
MK1L WTMK 1 1
Caution Set bits 5 and 6 to 1.
524
CHAPTER 22 INTERRUPT FUNCTIONS
5 <4> <3> <2> <1>
TMIF6 TMIF5 ADIF TMIF2
<4> <3> <2> <1>
TMMK6 TMMK5 ADMK TMMK2
After
Address
<0>
Reset
FFE2H 00H
TMIF1
WTIF Clock timer overflow detection flag
0 Not detected
1 Detected
After
Address
<0>
Reset
FFE6H FFH
TMMK1
WTMK Standby mode control by clock timer
0 Enables releasing the standby mode.
1 Disables releasing the standby mode.
R/W
R/W
R/W
R/W