Description
Use Program 0510 - Trunk Access Code to assign the the single-digit
access code (normally 9). This is the code extension users dial to access
Automatic Route Selection or Trunk Group Routing. You should only
have to change this option when matching room numbers to extension
numbers if the facility has rooms beginning with the digit 9.
The digit 9 is defined in Program 0501 as dial Type 6
with the Number of Digits Required set to 1. If you
change the trunk access code in Program 0510, you must
make the corresponding changes in Program 0501.
Conditions
None
Default Setting
9 (for all Tenant Groups)
Feature Cross Reference
Flexible Numbering Plan
Telephone Programming Instructions
To enter data for Program 0510 (Trunk Access Code):
1. Enter the programming mode.
2. 0510 + HOLD.
Tenant No:
3. Enter the number of the Tenant Group you want to program (1-4)
+ HOLD
Tenant_n:n
The previously programmed value displays.
4. Enter the new Trunk Access Code (0-9) + HOLD
5. Repeat from step 3 to select another Tenant Group.
OR
HOLD to exit.
0510 - Trunk Access Code
!! Caution !!
4-21