Defining The Supply Setup Packet - Avery Dennison ADTP1 Reference Manual

D e f i n i n g t h e S u p p l y S e t u p P a c k e t
Use the supply setup packet (B) to select supply type, ribbon, feed mode, supply position, and
cut position.
Syntax
{I,B,supply_type,ribbon,feed_mode,supply_posn,cut_posn,
skip_index,cut_mode | }
B1. B
B2. supply_type
Supply Setup Packet
Supply Type. 1 is the default. Options:
0 Center Black mark
1 Edge Die Cut
2 Continuous (non-indexed)
3 Center Aperture
4 Reserved
5 Tag Edge Aperture (commonly with RFID)
6 Center Tag Edge
7 Edge Black Mark
8 Center Die Cut
Use continuous supply in continuous mode.
If the supply has black marks, always use black mark sensing
whether or not the supply has attacher holes.
Configuring the Printer 2-7