Avery Dennison ADTP1 Reference Manual page 56

Bar Code
GS1 DataBar Bar Code Type (B13)
1 - GS1 DataBar 14
2 - GS1 DataBar 14 Truncated
3 - GS1 DataBar 14 Stacked
4 - GS1 DataBar 14 Stacked Omni
directional
5 - GS1 DataBar Limited
6 - GS1 DataBar Expanded
7 - UPCA
8 - UPCE
9 - EAN13
10 - EAN8
11 - UCC/EAN128 and CC A/B
12 - UCC/EAN128 and CC C
If FNC1 (function 1) is supported, use the pound sign (#) in the batch data to invoke it.
Intelligent Mail
Refer to the USPS® Intelligent Mail® Specification for more information.
Interleaved 2 of 5 or
Interleaved I 2 of 5 with Barrier Bar
MaxiCode*
MSI
PDF 417
POSTNET™
Quick Response (QR) Code Data
Type
Numeric Data
Alphanumeric data
8-byte data
Kanji data
Note: The maximum number of characters depends on the selected level of error
correction. When increasing the error correction level, the maximum number of
characters decreases. See
data for the QR Code.
3-8 Packet Reference Manual
Number of Characters
13 - no check digit input
13 - no check digit input
13 - no check digit input
13 - no check digit input
13 - no check digit input
Refer to the GS1 General Specification for
more information.
11 - no check digit input
10 - no check digit input
12 - no check digit input
7 - no check digit input
If not enough characters are entered, the bar
code pads to the left with zeros. If too many
characters are entered, unpredictable results
may occur.
31
0 - 2710
0 to 93 (alphanumeric)
0 to 128 (numeric)
0 – 14
0 – 2710
9 or 11
Model 1
1167
707
486
299
"Entering Batch Data for QR
Model 2
2710
2710
2710
1817
Code" in Chapter 6 to enter