Avery Dennison ADTP1 Reference Manual page 52

T11. color
T12. alignment
3-4 Packet Reference Manual
Field color overlay attributes. B is the default.
Transparent
Opaque
Options for standard printer fonts:
B
D/R/W
O
Options for scalable fonts:
A
B
E
F
N
O
S
T
Note: Solid black print should not exceed 30% on a given square inch
of the label, or the printhead life may be decreased.
Field placement in the packet is an important consideration when
using field color attributes. If a line field is defined before the
overlay (text or constant text) field, the line field is blocked out
by the overlay field, depending on the overlay field's color
attribute. If a line field is defined after the overlay field, the line
field is not blocked out by the overlay field, regardless of the
overlay field's color attribute.
Alignment of text in the field. L is the default. Options:
L Align on left side of field
C Center text within field (monospaced fonts only)
R Align on right side of field (monospaced fonts only)
B Align at midpoint of field
E Align at endpoint of the field
Use L, B, or E for any font.
The red dot indicates the field origin and the line indicates the
column position for each field in the following graphic.
The overlay field (text or constant text) does not
block out (or "erase") existing fields.
The overlay field blocks out (or "erases") existing
fields.
Opaque, Normal, Black, Normal
Opaque, Normal, White, Normal
Transparent, Normal, Black, Normal
Opaque, Normal, Black, Bold
Opaque, Normal, Black, Normal
Opaque, Italics, Black, Bold
Opaque, Italics, Black, Normal
Transparent, Normal, Black, Bold
Transparent, Normal, Black, Normal
Transparent, Italics, Black, Bold
Transparent, Italics, Black, Normal
Line field
blocked out
b y opaqu e
field using
attribu te B
Line field
not blocked
out b y
transp aren t
field using
attribu te O