Setting The Image Error Mode; Setting The Configuration Packet Mode (Ignore Config) - Avery Dennison ADTP1 System Administrator Manual

S e t t i n g t h e I m a g e E r r o r M o d e
Image errors occur when there is a problem producing a complete label. Press ESCAPE
to clear an image error.
Select
Disable
Enable
Image errors include:
600 unable to image batch
601 problem during imaging
603 missing batch
611 invalid font, bar code or density
612 missing batch data
613 reference point off label
Error 616 (bar code dot shifting failed) is always reported.
S e t t i n g t h e C o n f i g u r a t i o n P a c k e t M o d e ( I g n o r e C o n f i g )
The printer can respond to or ignore all online configuration packets.
We recommend changing your host's data stream, but if that is not possible, enable this
option. Use caution if ignoring online configuration packets, because the printer may
need the configuration for proper operation!
Select
Disable
Enable
6-6 System Administrator's Guide
To
If a format does not print as expected, an error message appears on
the display.
If a format does not print as expected, no error message appears
and the format prints as is.
For example, bar codes require a non-print zone; if a bar code is
placed too close to the edge of the label, no error is reported and
the bar code may not scan properly.
To
The printer responds to all online configuration packets.
The printer ignores all online configuration packets. This is useful
when you cannot change your host's data or when you want the
printer to operate as specified through the printer's menu.
Classification: Avery Dennison - Public
614 portion of field off label
615 invalid PDF417 bar code data
618 invalid font size
620 missing font data
621 invalid downloaded font
622 not enough font memory