Defining Verifier Fields - Avery Dennison ADTP1 Reference Manual

Q6. thickness
Q7. "pattern"
Example
Q,240,30,270,150,3,"" |
Defines a box field starting at row 240, column 30. It ends at row 270, column 150. It has a
thickness of 3 dots.
D e f i n i n g V e r i f i e r F i e l d s
The verifier field in a format references the verifier configuration packet ID to use for this
particular format. Every format can have a specific verifier configuration packet. See
Verifier Configuration
If a particular verifier configuration packet is not specified, the last sent verifier configuration
packet is used.
Note: Include the verifier field after the format header in the format packet.
Syntax
V,vfrID |
V1. V
V2. vfrID
Example
{F,25,A,R,M,508,508,"FMT-25" |
V,3 |
B,1,12,F,110,115,1,2,120,5,L,0 |}
Specifies verifier configuration packet #3 starting with format 25 until another verifier
configuration packet is specified.
Using the chart below for reference, write the desired line
thickness (1 to 99) in box Q6. 2 is the default. Boxes fill inward,
so make sure boxes do not overwrite other fields. Measured in
dots.
Line pattern. Enter "".
Packet," in Chapter 2 for more information.
Verifier Field.
Unique number from 1 to 999 to identify the verifier configuration
packet to use with this format.
"Defining a
Defining Fields 3-29