D E F I N I N G P R I N T E R S E T U P X M L T A G S
This chapter provides a reference for defining printer setup XML tags:
♦
job settings
♦
energy, contrast, print speed, black mark, and on-demand settings
♦
quantity
♦
image settings.
This chapter also includes information about adjusting the supply position (use backfeed) to
reduce the non-print zone.
D e f i n i n g P r i n t e r S e t u p T a g s
Tags required for each job are listed at the beginning of each section.
Defining the Job Container (Required)
The job tag is the container for a complete LNT file.
It contains the printer setup XML tags and field setup XML tags for each job.
Syntax
<Job>
Example <Job>
</Job>
Note:
The printer's software supports multiple <Job> tags
in one LNT file. Use version 2.0 or higher (6057) or version 1.0 or higher (6140).
Defining the LabelSize Tag (Required)
The LabelSize tag defines the length and width of the label.
It contains the following attributes: units, length, and width.
Syntax
<LabelSize units="value" length="value" width="value" />
units
length
width
printer setup tags
field setup tags
Unit of measure. Options:
Inches
Inches
MM
Millimeters
Pixels
Pixels
Length of the label in selected units:
Unit of Measure
Inches
Millimeters
Pixels
Width of the label in selected units:
Unit of Measure
Inches
Millimeters
Pixels
Minimum
Maximum
0.55
40.0
14.0
1016.0
112
8120
Minimum
Maximum
1.1
2.0
27.94
50.8
224
406
Defining Printer Setup XML Tags 2-1
2
Data Type
Float
Float
Integer
Data Type
Float
Float
Integer