Avery Dennison ADTP1 Reference Manual page 20

Syntax
{header,ID#,action,device | }
1. header
2. ID#
3. action
4. device
5. units
Example
{I,0,A,R,E |
C,0,25,0,0,0 | }
Adds a configuration to volatile RAM and specifies English units. It also uses the default contrast,
moves print 0.25 inches closer to the bottom of the supply and does not change the margin
adjustment, prints at the default print speed, and uses the default printhead width.
If optional parameters are not used, the syntax for the online configuration packets does not
change. For example,
{I,C,0,50,0,0,0 | }
uses the default contrast, moves print 50 dots (0.25) inches closer to the bottom of the supply
and does not change the margin adjustment, prints at the default print speed, and uses the
default printhead width.
Example
{I,0,U,R | }
Uploads the printer configuration from volatile RAM and returns the following to the host.
A,0,0,0,0,0 |
B,1,1,0,0,0,0,0 |
C,0,0,0,0,0,0 |
D,1,0,2 |
E,"~123~044~034~124~125~126","","~013~010" |
F,3,1,0,0,1 |
G,0,65,65 |
M,R,30715,23995,N,0,0|
M,R,R,0|
M,T,R,0|
M,I,R,3300|
M,D,R,640|
M,F,R,1500|
M,V,R,0|
T,0,0,0,0,0 |
Y,0,1,18,12,1,0,120,220,0,1,0,0 |
The parameters for each packet (A-Y) are displayed. In the first line that begins with M, 30715 is
the total volatile memory available, 23995 is the memory available in volatile RAM. There is no
non-volatile RAM available. The remaining lines beginning with M list the buffer sizes in 1/10K for
the Image, Downloadable Fonts, and Formats Buffers.
2-4 Packet Reference Manual
Constant I.
ID. Use 0.
Action. Options:
A Add configuration.
U Upload User Configuration.
Storage Device. Use R (Volatile RAM).
Units. (Optional parameter.) Options:
E English
M Metric
G Dots