Avery Dennison AP7.t User Manual
  1. Manuals
  2. Brands
  3. Avery Dennison Manuals
  4. Printer
  5. AP7.t
  6. User manual
Avery Dennison AP7.t User Manual

Avery Dennison AP7.t User Manual

Hide thumbs Also See for AP7.t:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, User Manual
06/05 Rev. 3.03-01
General Notice .............................................. 2
Safety ........................................................ 2
Troubleshooting ........................................ 2
Ordering Spare Parts ................................ 3
Note on Cleaning ...................................... 3
Cleaning Agents ........................................ 3
Printhead ....................................................... 5
a cleaning pen ........................................... 6
a cleaning roller ......................................... 7
alcohol-based solvents. ............................. 9
Replacing the printhead .......................... 10
USER MANUAL
AP 7.t
Rollers .........................................................12
Cleaning the drawing roller ......................12
Cleaning the pressure roller .....................13
Further Maintenance Tasks .........................14
Cleaning the punch sensor ......................14
Replacing the dust filter ...........................15
Reversing the braking brush ....................15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AP7.t and is the answer not in the manual?

Questions and answers

Related Manuals for Avery Dennison AP7.t

Summary of Contents for Avery Dennison AP7.t

  • Page 1: Table Of Contents

    06/05 Rev. 3.03-01 USER MANUAL AP 7.t Maintenance & Cleaning General Notice ..........2 Rollers ............12 Maintenance by Qualified Personnel ..2 Cleaning/replacing the print roller ....12 Safety ............2 Cleaning the drawing roller ......12 Troubleshooting ........2 Cleaning the pressure roller .....13 Ordering Spare Parts ........

  • Page 2: Maintenance & Cleaning

    06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t General Notice Maintenance by Qualified Personnel Regular technical maintenance is required to ensure that the device is always in operating order. Qualifications Maintenance work should only be carried out by qualified personnel. The safety, reliability and longevity of the device depend on correct maintenance.

  • Page 3: Ordering Spare Parts

    06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t Ordering Spare Parts CAUTION! - Using parts that do not meet the manufacturer’s high standards may damage the machine. Only use original spare parts supplied by the manufacturer. The following information is required when ordering spare parts: •...
  • Page 4 06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t Printhead cleaning pen. Roller cleaner Printhead cleaning roller and printhead cleaner.

  • Page 5: Printhead

    06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t Printhead CAUTION! - Electrostatic discharges or contact with sharp edges can damage the printhead. Protect the printhead [1A] [2A] from electrostatic discharge (ESD) when performing maintenance work or cleaning! Avoid touching the thermal transfer [1B] printhead with bare hands! Do not allow sharp objects to come into contact with the thermal edge.

  • Page 6: Cleaning The Printhead With A Cleaning Pen

    06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t Cleaning the printhead with a cleaning pen 1. Switch off the printer. 2. Remove the label material and ribbon from the printer. 3. Remove the thumb screw [3A]. A Thumb screw 4.

  • Page 7: Cleaning The Printhead With A Cleaning Roller

    06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t Cleaning the printhead with a cleaning roller 1. Remove the label material and ribbon from the printer. 2. Remove the thumb screw [6A]. A Thumb screw 3. Pull out the print roller [7A]. WARNING! Printhead cleaner is inflammable.
  • Page 8 06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t 5. Insert the cleaning roller [9]. TEXTILE PARAMETE > 6. Call parameter Head clean Head clean Press cut key 7. Press the cut key and keep it pressed. The printhead swivels down. Inserting the cleaning roller.

  • Page 9: Cleaning The Printhead With Alcohol-Based Solvents

    06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t Cleaning the printhead with alcohol-based solvents. If there are no cleaning pen and no cleaning roller at hand, the printhead can alternatively cleaned with alcohol-based solvents (e.g. methylated spirit). 1. Remove the label material and ribbon from the printer.

  • Page 10: Replacing The Printhead

    06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t Replacing the printhead CAUTION! - The printhead [14A] and the printhead mount [14B] are precision-aligned by the manufacturer. Never loosen the mounting screws [14C]! [14] A Printhead B Printhead mount Dismantling C Mounting screws It is easier to replace the printhead if...
  • Page 11 06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t 2. Loosen the green thumb screw [17A]. Remove the printhead. [17] A Printhead fastening screw 3. Remove both connectors [18A] from the printhead. [18] Printhead is detached A Connectors Assembly 1.

  • Page 12: Rollers

    06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t Rollers Cleaning/replacing the print roller Contamination on the print roller can degrade the print quality and the transport of the material. Clean the printhead [20A] and the print roller [20C] regularly, and always clean them before inserting a new ribbon.

  • Page 13: Cleaning The Pressure Roller

    06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t Cleaning the pressure roller 1. Release the pressure roller. 2. Sprinkle solvent onto a lint-free cloth and wipe the pressure roller [23A] with it. Grad- ually rotate the roller until it is completely clean.

  • Page 14: Further Maintenance Tasks

    06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t Further Maintenance Tasks Cleaning the punch sensor With frequent use of the printer, the punch sensor is gradually contaminated with lint. Large amounts of dirt can lead to problems with punch recognition. To free the punch sensor from dust and abraded particles: 1.

  • Page 15: Replacing The Dust Filter

    06/05 Rev. 3.03-01 USER MANUAL Maintenance & Cleaning AP 7.t Replacing the dust filter The dust filter is an optional accessory. Replace the filter liner at least monthly. 1. Turn the two screws [26A] on the filter housing by a quarter-turn. Remove the cover [27A].

Table of Contents